Festoon System with Plug & Play Capabilities
OverheadCraneKit.com
A Division of Hoosier Crane Service Company
Call Us Today
(800) 509-6131
Feel Free to call us Toll Free @ (800) 509-6131 or Email us @ info@overheadcranekit.com
OverheadCraneKit.com  is a Division of Hoosier Crane Service Company
  • Quality Products
  • Competitive Pricing
  • Knowledgeable Support Staff
  • Quick Deliveries
Copyright © 2008 OverheadCraneKit.com. All Rights Reserved
Shaw-box Overhead Crane Kits-
The Complete Crane Kit.
Virtually Everything Required to Build a Crane.
Standard Features:




  • HEAVY WALLED STRUCTURAL TUBE FRAME

  • ROTATING AXLE DRIVER
  AND TRAILER WHEELS

  • REMOVEABLE BOLT-ON RAIL SWEEPS WITH RUBBER BUMPERS

  • TOP AND SIDE MOUNTED BOLTED GIRDER CONNECTION PLATES

  • TWO HAND HOLES PER GIRDER CONNECTION
  PLATE SET

  • BRIDGE WHEELS RUN ON EITHER ASCE OR SQUARE BAR RAIL

  • TOTALLY ENCLOSED HELICAL GEAR BRIDGE REDUCERS

  • BRIDGE MOTORS BUILT AND SIZED FOR VARIABLE FREQUENCY DRIVE

  • NEMA 4/12 (IP65) CONTROL PANEL ENCLOSURE

  • ALL METAL PLUG & PLAY CONNECTION PLUGS
The new Yale Shaw-box Crane Kit, the industry's most complete overhead crane kit, contains virtually everything required to build a crane.  These Shawbox over head crane kits are economical and can significantly reduce the time it takes to build and crane.  Whether you are building a top running single girder, monobox, or double girder crane; you can rely on Shaw-box to provide the highest quality crane kit on the market.  You can depend on Yale Shaw-box.


  • Capacities up to 15 tons- single girder
  • Capacities up to 20 tons- double girder
The Yale Shaw-Box Complete Overhead Crane Kit
Shaw-Box World Series Hoist
HOIST AND TROLLEY
For Single and Double Girder Cranes

The Shaw-Box and Yale Hoists and Trolleys provide exceptional long life in heavy service applications.
  • Capacities from 1 Ton to 20 Ton.
  • Built to meet and exceed either FEM 2m or 3m duty (Similar to ASME H4 or H4+).
  • Low headroom design wire rope hoist for maximum hook travel.
  • 200% torque DC hoist motor brake.
  • All controls housed in NEMA 4/12 enclosure.
  • Triple reduction, helical, oil bath lubricated hoist gearing in cast aluminum gear case.
  • Standard Hoists &Trolleys are CSA approved.
Single & Double Girder End Trucks
SINGLE & DOUBLE
GIRDER END TRUCKS
Complete w/ connection plates, sweeps & bumpers

  • Fitted with 2 removeable (not welded) Rail Sweeps for easier inspection of the wheels.
  • 2 oversized hand holes to allow for easy access
  • Rotating Axles Driver and Trailer Wheels- No exposed gearing.
  • Wheels are flat tread machined & hardened to 300-320 BHN and can run on ASCE or Square Bar Rail.
  • Top and Side Girder Connection Plates come standard with the end trucks.
  • Girder connection plates are bolted not welded.  This allows for easy installation and shipping.
  • Constructed from Heavy Wall ASTM Structural Tube.
Shawbox Control Panel has Plug & Play Connections.
8 button Pendant Control and is easily installed.
CONTROL PANEL
with Plug and Play Connections

  • Plug & Play cables connect to bridge motors, hoist  & trolley power and pendant control for easy assembly.
  • Standard Variable Frequency Control provides controlled acceleration and deceleration for a smooth operation, reduced load swing and extends the life of the drive system.
  • NEMA 4/12 Enclosure
  • Meets NEC specifications
  • Fusing, Manual Disconnect and Mainline Contactor
  • CSA Approved.
FESTOON SYSTEM
with Plug and Play Connections

  • Easy quick connect plugs requires no special tools or skills to "wire up" a bridge crane.
  • Connection housings are durable metal with spring loaded snap connections. No plastic housings to break or long screws, or loose gaskets to contend with.
  • Flat cables and plugs are CSA Approved.

BRIDGE MOTORS
Complete with Plug & Play Power Connections

  • Motor Reducer and DC rectified brake are fully assembled for easy installation.
  • Shipped and ready to install with 4 bolt connection.
  • Direct Spline connection to the drive wheel
  • Power 230/460V, 200V & 575V
  • CSA and CE Approved

PENDANT CONTROL
Plug and Play Feature

  • Plug & Play connection makes installation quick and easy.
  • Simplified 8 button operation for all movement
  • UL Listed and CSA Approved
HISTORY OF SHAW-BOX

In 1932, the Shaw Crane Company merged with the Alfred E. Box Crane and Hoist Corporation, inventors 'of the first electric cable hoist. Together, the two companies continued to lead, revolutionizing the way heavy materials are handled. The LOAD LIFTER electric hoist, first pioneered in 1921, has evolved into today's legendary Series 700 and 800 wire rope hoists. Other innovations included the first portable electric and lever-operated chain hoists, the development of built-in overload protection devices, air and worm gear hoist technology, and a wide range of advanced trolleys, bridge components, and accessories.